|
|
 |
|
|
|
 |
|
|
Series ECS
The steam sterilizer range Series ECS is designed and equipped for sterilization of instruments, textiles and rubber items acc. to EN 285.
The chamber size enables a high operational capacity of sterile materials.
|
SPECIFIC CHARACTERISTICS
|
|
|
|
 |
- fully automatic steam sterilizer
- useable space 9, 12, 18 StU (sterilization units)
- integrated, low-noise Aqua-Jet vacum pump
- color graphic Touch-Display (640 x 480 pixels)
- single or dual door design (all models)
- chamber, base frame, wall plates and steam carrying lines in stainless steel
- rectangular, double walled chamber for consistent heating with steam
- lowered version (pit version) permitting floor level loading of the chamber
- PID-controlled steam valve
- built-in process data printer
- additionally hinged, swing-open, front-door for full service access
- Siemens SIMATIC-control
- fractionated vacuum process for all sterilization programs
- EN-standard compliant, with 2 test programs and 5 non-adjustable programs for 121°C and 134°C
|
 |
Pit Version |
Base Version |
Direct Loading or Loading via Transport Trolley
The entire device can be lowered via a pit in the floor, thus floor level loading is possible.
For both installation possibilities there are loading and transport trolleys which enable manual or automatical loading/unloading
of the sterilization chamber.
|
|
TECHNICAL DETAILS
Chamber System
- The sterilization chamber is a horizontal, rectangular, double-walled welded construction of chrome-nickle-molybdenum steel. A double-jacket of CrNi-steel is drawn over the entire chamber surface. The consistent double-walled construction and a highly efficient heat insulation guarantee consistent pre-heating with little loss.
- Designed acc. to the Technical Regulations for Steam Vessels the chamber is approved for a maximum working overpressure of 3 bar.
- The chamber is tested and approved by TÜV per Pressure Vessel Regulations.
- For the Pit Versions, floor level loading and unloading of the chamber is possible.
Door System
- Horizontally opening, electric door drive.
- Hermetically sealed chamber and doors via high-grade silicone-seal in milled door groove.
Vacuum Device
- Water-Jet vacuum pump with low-noise pressure pump, integrated as standard.
- Low water consumption due to integrated operating water circulation tank with thermostatically, requirement regulated cold water supply.
- Water supply acc. to DIN 1988 and DVGW, disconnected from drinking water.
- Option for maximal cold water saving: supply via connection of pump to and on-site coolant water supply.
Pipe System
- All steam-bearing lines and screw-joints made of stainless steel, high-grade insulation.
- Connection to external steam (on-site steam or steam generator).
Measurement and Control
- High-performance and adaptable PLC-control Siemens SIMATIC.
- Two independently working measuring systems for processing all processrelevant data, spearated into control and registration (monitoring, documentation resp.).
- PID-steam pressure regulation for secure compliance with the regulation parameters and tolerances required by DIN EN 285.
- Built-in barometric compensated absolute pressure transducer for registration of the pressure progression in the chamber, independent form the atmospheric pressure, thus precise regulation for compliance with the sterilization temperature band of -0°C to +3°C at a norm band-width of max. ±0.5°C
- Serial interface RS 232 for PC-connection and data transfer.
- Menu-driven control of the sterilizer via graphic Touch-Screen panel with background-lit LCD-display offering program selection, program start, and information on program course and possible failures.
Documentation
- Built-in process data printer for measuring, dipslay and registration of process specific data.
- A pressure and temperature line recorder is available as an option.
- Other possible options:
Batch documentation via barcode registration system for registration, marking and management of sterilization material and further processing of the data for sterilization control, offering a traceabiliy of instruments.
PricingG
- Dependant on equimpent, design and installed options.
OPTIONS
- Inertgas measuring module for detection of inert gases in sterilization chamber.
- 2-channel-line-recorder for registration of analogue pressure and termperature measuring values.
- Batch documentation: registration, description and storage of process and batch data on a PC; generation and reading of barcode labels for sterile materials a t the pack locations.
- Connection to cooling water circuit for reduction of mains water consumption.
- Automatic loading and unloading device, can be extended on the unloading side by using additional modules.
ACCESSORIES
- Transport trolley, fixed height.
- Transport trolley, variable height, for comfortable loading at varying working heights
- Loading trolley, two versions with one or two door loading levels.
- Service access, laterally (right) for access to control and aggregates.
- Superstructure cladding. Stainless steel cladding above the sterilizer.
- Base tub, water drip collection pan.
- Base cover, stainless steel.
|
|
|
|
 |
 |
|
